CMSC_API_2013_TOYOTA_SEQUOIA_COOLANT_IN_JACKSONVILLE__FL_1_PAGE_TITLE

The system should be checked cold because it is hot and pressurized after running. A dropping reservoir level may point to a leak rather than normal consumption. Testing and inspection can determine whether the coolant needs service or the system needs repair.

• Temperature gauge running higher than usual
• Sweet smell or a puddle under the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the coolant type and concentration the manufacturer specifies for this vehicle. The pressure test helps separate a fluid service from a leak repair. Inspection adds context to the test result and can identify visible concerns around the system.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

Coolant condition can also be tested during a service visit between scheduled points. Additives deplete even when coolant still appears to work normally, so appearance alone does not determine condition. A technician can evaluate the fluid and pressure-test the system when you bring the vehicle in.

• Follow the manufacturer's maintenance schedule
• Have coolant condition tested during service visits
• Use pressure testing to check for leaks

Coolants are not interchangeable, so the correct product should be selected for this vehicle rather than based on general appearance. Colour is not a reliable guide to what is in the bottle. A service visit can address the refill using the manufacturer's specified coolant type and concentration.

• Use the manufacturer's specified coolant type
• Do not treat different coolants as interchangeable
• Do not rely on fluid colour to identify coolant

A level that keeps dropping points to a leak rather than normal consumption and calls for an inspection. Never open the cooling system when it is hot or pressurized; checking it is done cold. Pressure testing can help identify whether the system needs repair.

• Adding coolant does not restore the additive package
• A repeatedly low level can indicate a leak
• Check the system only when it is cold

Request coolant service for your 2013 Toyota Sequoia and the visit can include a condition check, pressure test, and inspection of related components. The dealership is located at 11340 Philips Hwy in Jacksonville, Florida. You can also review current service specials before booking.

• Schedule service online
• Call 904-337-6618
• Visit 11340 Philips Hwy, Jacksonville, FL 32256