2013 Toyota 4Runner Brake Pads in Jacksonville, FL

A squeal or scrape may appear as friction material becomes low. Grinding means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book service. An inspection measures pad material on all four corners and checks the rest of the braking system.

• Squeal or scrape during braking
• Grinding caused by contact with the rotor
• Longer pedal travel or stopping distance

The replacement pads are matched to the vehicle’s braking system. Rotors, calipers, hardware, and brake fluid condition are assessed with the pads because brakes wear as a system. The inspection helps determine whether the vehicle needs pad service now and whether another component needs attention.

• Measurement of remaining pad material on all four corners
• Replacement with pads matched to the braking system
• Inspection of rotors, calipers, hardware, and brake fluid condition

City traffic, towing, hills, and hard stops all shorten pad life by increasing brake use. Driving conditions and vehicle loading also affect how quickly friction material wears. Measuring all four corners shows the remaining material and helps determine whether service is needed now or at a later visit.

• Frequent city stops increase brake use
• Towing and hills place additional demand on the system
• Inspection measures actual remaining pad material

Rotors, calipers, hardware, and brake fluid are assessed alongside the pads. A rotor condition that affects braking or the new pad should be addressed rather than ignored, because replacing one component while overlooking another can shorten the life of the new part. The inspection determines the appropriate brake-system work.

• Rotors are inspected during pad service
• Calipers and hardware are assessed with the braking system
• Brake fluid condition is reviewed as part of the inspection

Grinding means the friction material is gone and the backing plate is on the rotor; stop driving and book it. Squealing, scraping, longer pedal travel, and increased stopping distance also call for prompt inspection. Brake pads, rotors, hardware, calipers, and fluid should be assessed together to determine the condition of the system.

• Stop driving if grinding occurs
• Book service for longer stopping distance
• Have all four corners measured and related parts inspected

The Jacksonville, Florida, service center can measure the remaining pad material on all four corners and inspect the related brake components. The dealership is located at 11340 Philips Hwy, Jacksonville, FL 32256. Review service specials before booking if desired.

• Schedule an appointment online
• Call 904-337-6618
• Visit 11340 Philips Hwy in Jacksonville, FL