2021 Toyota RAV4 Prime Coolant

These symptoms can reflect coolant condition or a leak, so an inspection is important. The cooling system is under pressure and hot after running; checking it should be done cold.

• Temperature gauge running higher than usual
• Sweet smell or a puddle under the front of the vehicle
• Rusty, cloudy, or low coolant in the reservoir

The refill uses the type and concentration the manufacturer specifies for this vehicle. These checks help distinguish coolant service that is due from a leak requiring repair.

• Drain and refill with manufacturer-specified coolant
• Cooling-system pressure test for leaks
• Inspection of hoses, cap, radiator, and water pump area

For this model, the published schedule calls for coolant flush and replacement every 100,000 miles. Coolant condition can also be tested during a service visit between scheduled points.

• Follow the manufacturer's published maintenance schedule
• Have coolant condition tested during service
• Request a pressure test when a leak is suspected

Coolants are not interchangeable, and colour is not a reliable guide to what is in the bottle. A service visit can help confirm the system's condition and support the correct refill.

• Use the coolant type specified by the manufacturer
• Do not treat different coolants as interchangeable
• Do not identify coolant by colour alone

A level that keeps dropping indicates a leak rather than normal consumption. Never open a cooling system while it is hot or under pressure; check it cold and book service if the level changes.

• Adding coolant does not renew depleted additives
• A repeatedly low level can indicate a leak
• Have the system pressure tested when needed

Describe any temperature, smell, puddle, or reservoir-level concern when booking. The service team can assess coolant condition, pressure test the system, and inspect the related components.

• Use the online service scheduler
• Call 904-337-6618 for assistance
• Visit 11340 Philips Hwy, Jacksonville, FL 32256